banner_page

Z84C4410VEG

2MB 1.27mm 5V Specialized Interface IC Z80 Series Z84C44 44 Pin 10MHz 5V PLCC


  • Manufacturer: Zilog
  • Nocochips NO: 899-Z84C4410VEG
  • Package: PLCC
  • Datasheet: PDF
  • Stock: 883
  • Description: 2MB 1.27mm 5V Specialized Interface IC Z80 Series Z84C44 44 Pin 10MHz 5V PLCC (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PLCC
Number of Pins 44
Supplier Device Package 44-PLCC
Packaging Tube
Published 2002
Series Z80
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 105°C
Min Operating Temperature -40°C
Applications I/O Controller
HTS Code 8542.31.00.01
Subcategory Microprocessors
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 10MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number Z84C44
Pin Count 44
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Voltage 5V
Memory Size 2MB
Memory Type ROMless
uPs/uCs/Peripheral ICs Type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Supply Current-Max 15mA
Bit Size 8
Data Bus Width 8b
Address Bus Width 1
Boundary Scan NO
Low Power Mode YES
Number of Serial I/Os 2
Bus Compatibility Z80
Data Transfer Rate-Max 0.25 MBps
Communication Protocol ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC
Data Encoding/Decoding Method NRZ
Height Seated (Max) 4.57mm
Length 16.5862mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

Z84C4410VEG Overview


This fits nicely with the PLCC package.This product comes in a Tube case.There is no installation of this component in the way of Surface Mount.This component applies to I/O Controller.It is possible to find related parts based on the Z84C44.In total, there are 44terminations.Make sure this device is set to 5V.It contains a total of 44 pins.Operation is performed through the 44pins.Currently, Surface Mountis mounting it.For optimum reliability, it operates at a temperature of [0].It is imperative that the maximum value of 105°Cis maintained in order to ensure continued operation.Electronic components of the Microprocessorsfamily are used.ICs used in interfaces are operated at a supply voltage of 5V.It incorporates SERIAL IO/COMMUNICATION CONTROLLER, SERIALUPS/UCS/Peripheral ICs.Electronic parts in the Z80series are included in this part.The device can deliver voltage at 5V volts.In operation at a frequency of [0], it is capable of achieving good efficiency.This interface IC has a total of 2 serial I/Os available for use.Components can supply voltages as low as [0].

Z84C4410VEG Features


It is based on Z84C44.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2

Z84C4410VEG Applications


There are a lot of Zilog Z84C4410VEG Specialized Interface ICs applications.

  • Access Concentrators
  • RGB switches
  • Digital cross connects (DSX-1)
  • and 5 REN loads
  • Existing multiplexer applications (both fault-protected and
  • Cross Connects
  • CSU/DSUs
  • New designs requiring multiplexer functions
  • Ultrasound
  • Sample hold systems

Write a review

Note: HTML is not translated!
    Bad           Good