Z8523008PEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523008PEG Overview
It's a good fit for the 40-DIP (0.620, 15.75mm) package.A case of Tubeis provided.Through Holeis the way in which this component is installed.It is possible to find devices that supply 4.5V~5.5V volts.The Z85230can be used to locate related parts.There are 40 terminations on it.Make sure that this device is set to 5V.A total of 40pins are located on it.Operation is carried out using the 40pins.The unit is mounted on Through Hole.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.When the value is set to [0], the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.Interface ICs operate at a voltage level of 5V volts.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.It is capable of delivering voltage at 5V degrees Celsius.For the performance, its output frequency should not exceed 8MHz.This interface IC has a total of 2 serial I/Os available for use.
Z8523008PEG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523008PEG Applications
There are a lot of Zilog Z8523008PEG Specialized Interface ICs applications.
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- Voice over IP/DSL – Integrated Access Devices, Smart
- Communication systems
- New designs requiring multiplexer functions
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Ultrasound
- Isolation
- Routers
- Medical/Industrial
- (FTTH)
