Z8523008PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 20mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523008PSG Overview
It's a good fit for the 40-DIP (0.620, 15.75mm) package.It comes in a case with a [0].The component is installed in the way indicated by Through Hole.The device is capable of supplying voltages of 4.5V~5.5V volts.The Z85230can be used to locate related parts.There are 40 terminations on it.It is important to keep in mind that this device should be set to 5V.It has a total of 40pins.Operation is carried out using the 40pins.It is mounted by Through Hole.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.When the value is set to [0], the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.It is designed to operate at 5V supply voltage, with the interface IC conducting at this voltage.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Voltage can be delivered at 5V.A frequency of 8MHzenables it to achieve good efficiency.Currently, it has 2serial I/O ports.
Z8523008PSG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z8523008PSG Applications
There are a lot of Zilog Z8523008PSG Specialized Interface ICs applications.
- Microprocessor Controlled Analog Systems
- Multiplexers
- Cable Modem, Cable PC
- E1 Multiplexer
- USB 1.1 signal switching circuits
- Audio signal routing
- Public switching systems and PBX interfaces
- DSLAMs
- High-Voltage
- SONET/SDH ADM
