Z8523008VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 10mA |
| Access Time | 8 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523008VSC Overview
This fits well into the 44-LCC (J-Lead) package.It comes in a Tube case.Surface Mountis the way in which this component is installed.It is possible to find devices that supply 4.5V~5.5V volts.On the basis of the [0], it is possible to find related parts.It consists of 44terminations.It is important to keep in mind that this device should be set to 5V.It contains a total of 44 pins.A device's operation is controlled by the 44pins.It is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].By setting the value of 70°Cto the maximum, this ensures that the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/peripheral IC.Voltage can be delivered at 5V.A frequency of 8MHzis capable of achieving good efficiency.This interface IC has a total of 2 serial I/Os available for use.
Z8523008VSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z8523008VSC Applications
There are a lot of Zilog Z8523008VSC Specialized Interface ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Switching Systems
- SONET/SDH ADM
- DSLAMs
- Communications systems
- Industrial control systems
- Fault Tolerant Systems
- MP3 players
- Data Acquisition Systems
