Z8523008VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523008VSG Overview
The 44-LCC (J-Lead)package is a good fit for it.The item is packaged in a Tube case.Surface Mountis the way in which this component is installed.It is capable of supplying a voltage of 4.5V~5.5V.Based on the [0], it is possible to locate related parts.This termination has 44terminations.It is important to remember that this device should be set to 5V.In total, there are 44pins on the board.In order to operate, we use the 44pins.In this case, it is mounted by Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.There are electronic components in the Other Microprocessor ICs family.An interface IC operates with a supply voltage of 5V.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/peripheral IC.Voltage can be delivered at 5V.For the performance, its output frequency should not exceed 8MHz.In the interface IC, there are 2 serial I/Os.
Z8523008VSG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523008VSG Applications
There are a lot of Zilog Z8523008VSG Specialized Interface ICs applications.
- Modems
- Battery Powered Instruments
- SONET/SDH ADM
- New designs requiring multiplexer functions
- Data switching
- Communications systems
- Audio and video signal routing
- Residential Gateways, Home Gateway/Router
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Ultrasound
