Z8523010PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523010PEC Overview
This fits well into the 40-DIP (0.620, 15.75mm) package.There is a Tubecase included with it.In this case, this component is installed in accordance with Through Hole.It is possible to obtain devices that supply 4.5V~5.5V volts.A Z85230can be used to identify related parts.In total, there are 40terminations.It is recommended that you set this device to 5V.In total, it consists of 40pins.In order for the operation to be performed, the 40pins must be connected.In this case, it is mounted by Through Hole.It is designed to work at a minimum working temperature of -40°C to ensure reliability.It is imperative that the maximum value of 105°Cis maintained in order to ensure continued operation.Electronic components from the family Other Microprocessor ICsare used.This device consists of SERIAL IO/COMMUNICATION CONTROLLER, SERIAL UPs, UCs, or peripheral ICs.The device can deliver voltage at 5V volts.As a result of using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.As long as the frequency is set to [0], the device is capable of achieving good efficiency.This interface IC has a total of 2 serial I/Os available for use.
Z8523010PEC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z8523010PEC Applications
There are a lot of Zilog Z8523010PEC Specialized Interface ICs applications.
- Transmit and
- Isolation
- Data Acquisition Systems
- Residential Gateways, Home Gateway/Router
- Cross Connects
- MP3 players
- Multi-Line E1 Interface Cards
- Medical systems
- CSU/DSUs
- Automatic test equipment
