Z8523010PSC
| Parameters | |
|---|---|
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
Z8523010PSC Overview
It fits well with the package [0].A Tubecase is provided with it.The component is installed in the way indicated by Through Hole.There is the potential for the device to supply 4.5V~5.5V volts.Using the Z85230can help you find related parts.This termination has 40terminations.It is important to note that this device should be set to 5V.In total, it contains 40pins.In order to operate, we use the 40pins.Currently, Through Holeis mounting it.It operates at a minimum working temperature of 0°C to ensure reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.The electronic components belong to the Other Microprocessor ICs family.It incorporates SERIAL IO/COMMUNICATION CONTROLLER, SERIALUPS/UCS/Peripheral ICs.The device can deliver voltage at 5V volts.This device is also capable of finding [0].As long as the frequency is set to [0], the device is capable of achieving good efficiency.There are 2 serial I/Os available in the interface IC.
Z8523010PSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z8523010PSC Applications
There are a lot of Zilog Z8523010PSC Specialized Interface ICs applications.
- Battery Powered Instruments
- Audio/video switches
- Imaging
- Power routing
- Industrial and process control systems
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- nonfault-protected)
- HDTV
- High-Voltage
