Z8523010PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 10MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523010PSG Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for it.It comes in a case with a [0].The component is installed according to Through Hole.There is the potential for the device to supply 4.5V~5.5V volts.Using the Z85230you can find related parts.The number of terminations is 40.Keep in mind that this device should be set to 5V.In total, it consists of 40pins.Operation is carried out through the 40pins.Through Holemounts it.It is designed to work at a minimum working temperature of 0°C to ensure reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.This electronic component belongs to the family of [0].An interface IC operates with a supply voltage of 5V.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.As a result of using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Ideally, its output frequency should not exceed 10MHz.In the interface IC, there are 2 serial inputs or outputs.
Z8523010PSG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523010PSG Applications
There are a lot of Zilog Z8523010PSG Specialized Interface ICs applications.
- Communications systems
- PDAs
- Sample-and-hold systems
- Relay Replacement
- and 5 REN loads
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- ?Remote wireless modules
- Digital Cross-Connects
- Audio and video signal routing
- Multiplexers
