Z8523010VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523010VSC Overview
The 44-LCC (J-Lead)package is a good fit for it.A Tubecase is provided with it.There is no installation of this component in the way of Surface Mount.The device is capable of supplying 4.5V~5.5V volts.The Z85230can be used to locate related parts.The termination count on it is [0].You should set this device to 5V.There are a total of 44 pins on the device.In order to operate, the 44pins are used.The mount is Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].Keeping 70°Cas the maximum value will ensure consistency.The electronic components is from Other Microprocessor ICs family.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The device is capable of delivering voltage at 5V.Using this device, you can also find [0].A frequency of 10MHzis capable of achieving good efficiency.Currently, it has 2serial I/O ports.
Z8523010VSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z8523010VSC Applications
There are a lot of Zilog Z8523010VSC Specialized Interface ICs applications.
- Battery Powered Systems
- Cable Modem, Cable PC
- CSU/DSUs
- HDTV
- SDH/SONET multiplexers
- Medical systems
- Sample-and-hold systems
- E1 Network Equipment
- Medical/Industrial
- Microprocessor Controlled Analog Systems
