Z8523016PEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16.384MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523016PEG Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for this feature.There is a Tubecase included with it.The component is installed in the way indicated by Through Hole.The ability to supply 4.5V~5.5V volts is available with certain devices.The Z85230can be used to locate related parts.It consists of 40terminations.Make sure this device is set to 5V.A total of 40pins are located on it.40 pins are used for operation.The device is mounted by Through Hole.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.Keeping 100°Cas the maximum value will ensure consistency.Electronic components from the family Other Microprocessor ICsare used.The interface IC conducts in a supply voltage of 5V.There are SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/Peripheral ICs integrated into this device.Voltage at 5Vcan be delivered by the device.With the use of this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Ideally, its output frequency should not exceed 16.384MHz.Currently, it has 2serial I/O ports.
Z8523016PEG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523016PEG Applications
There are a lot of Zilog Z8523016PEG Specialized Interface ICs applications.
- Public switching systems and PBX interfaces
- Channel Banks
- Voice over IP/DSL – Integrated Access Devices, Smart
- Automotive applications
- Automatic test equipment
- Battery-powered systems
- High reliability control systems
- Low-Voltage
- ?Central office or PBX (Private Branch Exchange)
- Audio/video switches
