Z8523020PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 20mA |
| Access Time | 20 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523020PSC Overview
It fits well with the package [0].The package contains a Tube case.The component is installed according to Through Hole.A device capable of providing 4.5V~5.5V volts is available.Using the Z85230you can find related parts.In total, there are 40terminations.It is important to note that this device should be set to 5V.In total, there are 40pins on the board.Operation is carried out through the 40pins.It is mounted on Through Hole.In order to ensure reliability, the unit works at a minimum working temperature of [0].In order to maintain consistency, a maximum value of 70°Cis recommended.The electronic components is from Other Microprocessor ICs family.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As a result, it is capable of delivering voltage at 5V.As a result of using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.It is capable of achieving good efficiency when functioning at a frequency of 20MHz.It has 2serial I/Os.
Z8523020PSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 20MHz
Number of Serial I/Os : 2
Z8523020PSC Applications
There are a lot of Zilog Z8523020PSC Specialized Interface ICs applications.
- Channelized and Unchannelized DS3 applications
- Communication systems
- Automatic test equipment
- Residential Gateways, Home Gateway/Router
- RGB switches
- Ultrasound
- Power routing
- Audio/video switches
- Video signal routing
- MP3 players
