Z8523020PSG
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 20MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85230 |
| Pin Count | 40 |
Z8523020PSG Overview
This fits well into the 40-DIP (0.620, 15.75mm) package.It comes in a case with a [0].The component is installed in the way indicated by Through Hole.It is possible to find devices that supply 4.5V~5.5V volts.The Z85230can be used to locate related parts.The termination count on it is [0].It is important to keep in mind that this device should be set to 5V.There are a total of 40 pins on it.40 pins are used for operation.The mount is Through Hole.A minimum working temperature of 0°Cis required to ensure the reliability of the device.When the value is set to [0], the part will run consistently.Electronic components in this system belong to the Other Microprocessor ICs family.The interface IC conducts at a voltage of 5V.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.At [0], it is capable of delivering voltage.It is also possible to find MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOusing this device.In order to ensure good performance, its output frequency should not exceed 20MHz.There are 2 serial I/Os available in the interface IC.
Z8523020PSG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523020PSG Applications
There are a lot of Zilog Z8523020PSG Specialized Interface ICs applications.
- High reliability control systems
- Sample-and-hold systems
- Automatic test equipment
- Public switching systems and PBX interfaces
- Sample hold systems
- PDAs
- Multiplexers
- PBXs
- Low-Voltage
- DSLAMs
