banner_page

Z8523310VSC

1.27mm 5V Specialized Interface IC EMSCC? Series Z85233 44 Pin 5V 44-LCC (J-Lead)


  • Manufacturer: Zilog
  • Nocochips NO: 899-Z8523310VSC
  • Package: 44-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 346
  • Description: 1.27mm 5V Specialized Interface IC EMSCC? Series Z85233 44 Pin 5V 44-LCC (J-Lead) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 44-LCC (J-Lead)
Number of Pins 44
Packaging Tube
Published 1995
Series EMSCC™
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO
HTS Code 8542.31.00.01
Subcategory Other Microprocessor ICs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number Z85233
Pin Count 44
Qualification Status Not Qualified
Power Supplies 5V
Temperature Grade COMMERCIAL
uPs/uCs/Peripheral ICs Type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency 10MHz
Supply Current-Max 8mA
Boundary Scan NO
Low Power Mode NO
External Data Bus Width 8
Number of Serial I/Os 1
Data Transfer Rate-Max 0.3125 MBps
Communication Protocol ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC
Data Encoding/Decoding Method NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)
Height Seated (Max) 4.57mm
Length 16.5862mm
Width 16.5862mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount

Z8523310VSC Overview


The 44-LCC (J-Lead)package would be a good match for it.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.It is possible to find devices that supply 4.5V~5.5V volts.The Z85233can be used to locate related parts.It consists of 44terminations.Be sure to set the device to 5V.There are a total of 44 pins on the device.44 pins are used for operation.Currently, Surface Mountis mounting it.For optimum reliability, it operates at a temperature of [0].This value enables the part to run consistently with a maximum value of [0].Electronic components of the Other Microprocessor ICsfamily are used.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.An electronic part of the series EMSCC?is being used in this application.It is capable of delivering voltage at 5V.This device is also capable of finding [0].The output frequency should not exceed 10MHzfor optimal performance.It is noted that the interface IC is equipped with 1serial I/Os.

Z8523310VSC Features


It is based on Z85233.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 1

Z8523310VSC Applications


There are a lot of Zilog Z8523310VSC Specialized Interface ICs applications.

  • Avionics
  • Signal routing between systems
  • MP3 players
  • E1 Network Equipment
  • Sample hold systems
  • Battery Powered Systems
  • Automatic test equipment
  • Microprocessor Controlled Analog Systems
  • Audio signal routing
  • Avionics test equipment

Write a review

Note: HTML is not translated!
    Bad           Good