Z8523316VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Series | EMSCC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z85233 |
| Pin Count | 44 |
| Temperature Grade | COMMERCIAL |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 10mA |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523316VSG Overview
The 44-LCC (J-Lead)package fits the device well.The item is packaged in a Tube case.The component is installed in the way indicated by Surface Mount.The ability to supply 4.5V~5.5V volts is available with certain devices.A Z85233can be used to identify related parts.In total, there are 44terminations.It is important to note that this device should be set to 5V.44pins are on it in total.Operation is carried out through the 44pins.The device is mounted by Surface Mount.It operates at a minimum working temperature of 0°C to ensure reliability.When 70°Cis the maximum value, the part will run consistently.This device consists of SERIAL IO/COMMUNICATION CONTROLLER, SERIAL UPs, UCs, or peripheral ICs.It is a member of the EMSCC?series of electronic components.With the use of this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.This device should not have an output frequency greater than 16.384MHz for optimal performance.The interface IC has 1serial I/Os that can be used to connect to the computer.
Z8523316VSG Features
It is based on Z85233.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 1
Z8523316VSG Applications
There are a lot of Zilog Z8523316VSG Specialized Interface ICs applications.
- E1 Network Equipment
- T1/E1 Terminals
- High-Voltage
- Audio and video routing
- Audio/video switches
- Medical Instrumentation
- nonfault-protected)
- Sample-and-hold systems
- Battery Powered Systems
- CSU/DSUs
