banner_page

Z8523320FSC

0.8mm 5V Specialized Interface IC EMSCC? Series Z85233 44 Pin 5V 44-LQFP


  • Manufacturer: Zilog
  • Nocochips NO: 899-Z8523320FSC
  • Package: 44-LQFP
  • Datasheet: PDF
  • Stock: 733
  • Description: 0.8mm 5V Specialized Interface IC EMSCC? Series Z85233 44 Pin 5V 44-LQFP (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 44-LQFP
Number of Pins 44
Packaging Tray
Published 1995
Series EMSCC™
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO
HTS Code 8542.31.00.01
Subcategory Other Microprocessor ICs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number Z85233
Pin Count 44
Qualification Status Not Qualified
Power Supplies 5V
Temperature Grade COMMERCIAL
uPs/uCs/Peripheral ICs Type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency 20MHz
Supply Current-Max 12mA
Boundary Scan NO
Low Power Mode NO
External Data Bus Width 8
Number of Serial I/Os 1
Data Transfer Rate-Max 0.625 MBps
Communication Protocol ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC
Data Encoding/Decoding Method NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)
Height Seated (Max) 2.5mm
Length 10mm
Width 10mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

Z8523320FSC Overview


It's a good fit for the 44-LQFP package.It is packaged in a Tray case.This component is installed in the way of Surface Mount.There is the potential for the device to supply 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.The terminations on it are [0].Be sure to set the device to 5V.A total of 44pins are located on it.In order to operate, the 44pins are used.It is mounted on Surface Mount.The device must operate at a minimum working temperature of 0°Cin order to be reliable.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.Electronic components of the Other Microprocessor ICsfamily are used.It incorporates SERIAL IO/COMMUNICATION CONTROLLER, SERIALUPS/UCS/Peripheral ICs.The electronic part in question belongs to the EMSCC? series.It is capable of delivering voltage at 5V degrees Celsius.MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO can also be founded when using this device.Ideally, its output frequency should not exceed 20MHz.In the interface IC, there are 1 serial I/Os.

Z8523320FSC Features


It is based on Z85233.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 1

Z8523320FSC Applications


There are a lot of Zilog Z8523320FSC Specialized Interface ICs applications.

  • SDH/SONET multiplexers
  • Battery Powered Instruments
  • AD7840/8, AD7870/1/2/4/5/6/8
  • SONET/SDH ADM
  • CSU/DSUs
  • Avionics test equipment
  • Automatic test equipment
  • ATM and Frame Relay Equipment
  • Audio signal routing
  • Precision test equipment

Write a review

Note: HTML is not translated!
    Bad           Good