Z85C3008PEG
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Weight | 5.953513g |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
Z85C3008PEG Overview
The 40-DIP (0.620, 15.75mm)package would be a good match for it.It comes in a case with a [0].This component is installed in the way of Through Hole.An output voltage of 4.5V~5.5V volts can be provided by the device.A Z85C30can be used to identify related parts.The number of terminations is 40.You should set this device to 5V.In total, it contains 40pins.Operation is carried out using the 40pins.By [0], it is mounted.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.In addition to ensuring the consistency of the part, 100°Cis the maximum value possible.Electronic components from the family Other Microprocessor ICsare used.The interface IC conducts in a supply voltage of 5.5V.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.The device is capable of delivering voltage at 5V.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Ideally, its output frequency should not exceed 16.384MHz.In the interface IC, there are 2 serial inputs or outputs.
Z85C3008PEG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3008PEG Applications
There are a lot of Zilog Z85C3008PEG Specialized Interface ICs applications.
- ATM and Frame Relay Equipment
- Mechanical reed relay replacement
- Cellular phones
- HDTV
- Automotive applications
- Video signal routing
- Avionics and Military Systems
- Battery Powered Systems
- Residential Gateways, Home Gateway/Router
- PDAs
