Z85C3008PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.94mm |
| Length | 52.58mm |
| Width | 14.22mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3008PSC Overview
The 40-DIP (0.620, 15.75mm)package would be a good match for it.The package contains a Tube case.The component is installed according to Through Hole.The device is capable of supplying 4.5V~5.5V volts.On the basis of the [0], it is possible to find related parts.There are 40 terminations on it.It is important to note that this device should be set to 5V.40pins are on it in total.In order to operate, we use the 40pins.The unit is mounted on Through Hole.In order to ensure reliability, the unit works at a minimum working temperature of [0].In order to maintain consistency, a maximum value of 70°Cis recommended.The electronic components belong to the Other Microprocessor ICs family.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.The device is capable of delivering voltage at 5V.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.A frequency of 8MHzenables it to achieve good efficiency.There are 2 serial I/Os available in the interface IC.
Z85C3008PSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z85C3008PSC Applications
There are a lot of Zilog Z85C3008PSC Specialized Interface ICs applications.
- ?Central office or PBX (Private Branch Exchange)
- Avionics
- (FTTH)
- RGB switches
- Sample-and-hold systems
- Cell phones
- Industrial control systems
- Medical/Industrial
- Precision instrumentation
- Battery Powered Systems
