Z85C3008VEC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3008VEC Overview
It's a good fit for the 44-LCC (J-Lead) package.A Tubecase is provided with it.Surface Mountis used to install this component.The device is capable of supplying 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.There are 44 terminations on it.Make sure that this device is set to 5V.In total, it consists of 44pins.Operation is performed through the 44pins.It is designed to work at a minimum working temperature of -40°C to ensure reliability.In order to maintain consistency, a maximum value of 100°Cis recommended.The electronic components belong to the Other Microprocessor ICs family.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.The device can deliver voltage at 5V volts.Using this device, you can also find [0].The system is capable of achieving good efficiency when it operates at a frequency of 8MHz.This interface IC has a total of 2 serial I/Os available for use.
Z85C3008VEC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z85C3008VEC Applications
There are a lot of Zilog Z85C3008VEC Specialized Interface ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- ATM and Frame Relay Equipment
- Audio and video switching
- Cellular phones
- Communication systems
- ?Central office or PBX (Private Branch Exchange)
- Existing multiplexer applications (both fault-protected and
- Video switching
- E1 Network Equipment
- ?Microwave transmission systems
