Z85C3008VEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3008VEG Overview
This fits well into the 44-LCC (J-Lead) package.It is packaged in a Tube case.The component has been installed according to the Surface Mountmethod.There is the potential for the device to supply 4.5V~5.5V volts.It is possible to find related parts based on the Z85C30.It contains 44terminations.It is recommended that you set this device to 5V.It contains a total of 44 pins.For operation, 44pins are used.Currently, Surface Mountis mounting it.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.Keeping 105°Cas the maximum value will ensure consistency.Electronic components of the Other Microprocessor ICsfamily are used.The interface IC conducts in a supply voltage of 5V.It incorporates SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOLUPS/UCS/Peripheral ICs.It is capable of delivering voltage at 5V degrees Celsius.Using this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Ideally, its output frequency should not exceed 16.384MHz.The interface IC has 2serial I/Os that can be used to connect to the computer.
Z85C3008VEG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3008VEG Applications
There are a lot of Zilog Z85C3008VEG Specialized Interface ICs applications.
- Switching Systems
- High-Voltage
- Multi-Line E1 Interface Cards
- Cell phones
- Audio and video routing
- Communication systems
- Cross Connects
- Battery Powered Instruments
- ?Microwave transmission systems
- Compatible with 65 V DACs and ADCs such as
