Z85C3008VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3008VSC Overview
This fits well into the 44-LCC (J-Lead) package.The item is packaged in a Tube case.It is installed according to Surface Mount.The device is capable of supplying voltages of 4.5V~5.5V volts.A Z85C30can be used to identify related parts.The termination count on it is [0].It is important to remember that this device should be set to 5V.A total of 44pins are located on it.In order to operate, the 44pins are used.The mount is Surface Mount.It operates at a minimum working temperature of 0°C to ensure reliability.By setting the value of 70°Cto the maximum, this ensures that the part will run consistently.Electronic components are of the Other Microprocessor ICsfamily.This device supports SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOLuPs/uCs/peripheral ICs.It is capable of delivering voltage at 5V degrees Celsius.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.A frequency of 8MHzis capable of achieving good efficiency.In the interface IC, there are 2 serial inputs or outputs.
Z85C3008VSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z85C3008VSC Applications
There are a lot of Zilog Z85C3008VSC Specialized Interface ICs applications.
- Cell phones
- ?Central office or PBX (Private Branch Exchange)
- Medical/Industrial
- Precision test equipment
- Battery Powered Systems
- Multi-Line E1 Interface Cards
- Avionics test equipment
- Precision instrumentation
- Residential Gateways, Home Gateway/Router
- ?Microwave transmission systems
