Z85C3008VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 8MHz |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.86mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3008VSG Overview
It's a good fit for the 44-LCC (J-Lead) package.The package contains a Tube case.It is installed according to Surface Mount.The device is capable of supplying voltages of 4.5V~5.5V volts.On the basis of the [0], it is possible to find related parts.It contains 44terminations.It is important to keep in mind that this device should be set to 5V.There are a total of 44 pins on it.Operation is carried out through the 44pins.By [0], it is mounted.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.This value enables the part to run consistently with a maximum value of [0].Electronic components from the family Other Microprocessor ICsare used.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/peripheral IC.Voltage can be delivered at 5V.It is also possible to find TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOusing this device.When operating at a frequency of [0], it is capable of achieving good performance.It is noted that the interface IC is equipped with 2serial I/Os.
Z85C3008VSG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z85C3008VSG Applications
There are a lot of Zilog Z85C3008VSG Specialized Interface ICs applications.
- Microprocessor Controlled Analog Systems
- Communication systems
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- SDH/SONET multiplexers
- Cell phones
- Microprocessor controlled systems
- High reliability control systems
- Channel Banks
- Channelized and Unchannelized DS3 applications
- Digital cross connects (DSX-1)
