Z85C3010PEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Weight | 5.953513g |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3010PEG Overview
It fits well with the package [0].It comes in a Tube case.The component is installed in the way indicated by Through Hole.It is possible to find devices that supply 4.5V~5.5V volts.The Z85C30can be used to find related parts.In total, there are 40terminations.It is recommended that you set this device to 5V.A total of 40pins are located on it.Operation is performed via the 40pins.It is mounted on Through Hole.For optimum reliability, it operates at a temperature of [0].When 100°Cis the maximum value, the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.In the interface IC, the supply voltage is set to 5.5V.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.Voltage can be delivered at 5V.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.For the output frequency to be effective, it should not exceed 16.384MHz.The interface IC has 2serial I/Os that can be used to connect to the computer.
Z85C3010PEG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3010PEG Applications
There are a lot of Zilog Z85C3010PEG Specialized Interface ICs applications.
- Optical Applications
- Digital Cross-Connects
- Modems
- Communication systems
- Access Concentrators
- ATM and Frame Relay Equipment
- HDTV
- Audio and video routing
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Sample hold systems
