Z85C3010VEC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3010VEC Overview
The 44-LCC (J-Lead)package would be a good match for it.It is packaged in a Tube case.There is no installation of this component in the way of Surface Mount.There is the potential for the device to supply 4.5V~5.5V volts.It is possible to find related parts based on the Z85C30.It consists of 44terminations.Keep in mind that this device should be set to 5V.In total, it contains 44pins.Operation is performed via the 44pins.A minimum working temperature of -40°Cis required to ensure the reliability of the device.When the value is set to [0], the part will run consistently.The electronic components belong to the Other Microprocessor ICs family.There are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/Peripheral ICs integrated into this device.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.Using this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.A frequency of 10MHzenables it to achieve good efficiency.It is noted that the interface IC is equipped with 2serial I/Os.
Z85C3010VEC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z85C3010VEC Applications
There are a lot of Zilog Z85C3010VEC Specialized Interface ICs applications.
- Ultrasound
- (FTTH)
- Industrial and process control systems
- Precision test equipment
- SONET/SDH ADM
- Video signal routing
- Mechanical reed relay replacement
- Optical Applications
- Sample-and-hold systems
- Medical/Industrial
