Z85C3010VEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.86mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3010VEG Overview
The 44-LCC (J-Lead)package fits the device well.It is packaged in a Tube case.The component is installed according to Surface Mount.It is possible to find devices that supply 4.5V~5.5V volts.Using the Z85C30you can find related parts.It contains 44terminations.Be sure to set the device to 5V.44pins are on it in total.Operation is performed through the 44pins.Surface Mountmounts it.The device must operate at a minimum working temperature of -40°Cin order to be reliable.It is imperative that the maximum value of 100°Cis maintained in order to ensure continued operation.Electronic components of the Other Microprocessor ICsfamily are used.The interface IC conducts in a supply voltage of 5.5V.The uPs/uCs/Peripheral IC this device incoporates is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.It is capable of delivering voltage at 5V.Using this device, it is also possible to establish [0].Ideally, its output frequency should not exceed 16.384MHz.The interface IC has 2serial I/O ports.
Z85C3010VEG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3010VEG Applications
There are a lot of Zilog Z85C3010VEG Specialized Interface ICs applications.
- ?Digital access cross connects
- PBXs
- Sample-and-hold systems
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Fault Tolerant Systems
- Channelized and Unchannelized DS3 applications
- Data Acquisition Systems
- Cell phones
- (FTTH)
- CSU/DSUs
