Z85C3010VSC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3010VSC Overview
It fits well with the package [0].A case of Tubeis provided.It is installed according to Surface Mount.Devices that are capable of supplying 4.5V~5.5Vvolts may be used.The Z85C30can be used to find related parts.The terminations on it are [0].It is recommended that you set this device to 5V.A total of 44pins are located on it.In order for the operation to be performed, the 44pins must be connected.The device must operate at a minimum working temperature of 0°Cin order to be reliable.In order to maintain consistency, a maximum value of 70°Cis recommended.There are electronic components in the Other Microprocessor ICs family.In this device, there are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs, uCs, or peripheral ICs.It is capable of delivering voltage at 5V.Using this device, it is also possible to establish [0].In operation at a frequency of [0], it is capable of achieving good efficiency.Currently, it has 2serial I/O ports.
Z85C3010VSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z85C3010VSC Applications
There are a lot of Zilog Z85C3010VSC Specialized Interface ICs applications.
- Access Concentrators
- Communication systems
- PCMCIA cards
- Multiplexers
- USB 1.1 signal switching circuits
- High reliability control systems
- Video switching
- MP3 players
- Avionics and Military Systems
- Communications systems
