Z85C3010VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3010VSG Overview
The 44-LCC (J-Lead)package is a good fit for this feature.This product comes in a Tube case.There is no installation of this component in the way of Surface Mount.The ability to supply 4.5V~5.5V volts is available with certain devices.Based on the [0], related parts can be found.A total of 44terminations have been recorded.It is important to keep in mind that this device should be set to 5V.In total, it consists of 44pins.Operation is performed via the 44pins.It is mounted by Surface Mount.As a result, the device operates at a minimum working temperature of 0°Cto ensure its reliability.As long as the maximum value is [0], the part runs consistently.Electronic components are of the Other Microprocessor ICsfamily.The interface IC conducts at a voltage of 5.5V.This device consists of SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL UPs, UCs, or peripheral ICs.At [0], it is capable of delivering voltage.Using this device, it is also possible to establish [0].The output frequency should not exceed 10MHzfor optimal performance.Currently, it has 2serial I/O ports.
Z85C3010VSG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3010VSG Applications
There are a lot of Zilog Z85C3010VSG Specialized Interface ICs applications.
- Signal routing between systems
- MP3 players
- ?Central office or PBX (Private Branch Exchange)
- DSLAMs
- Medical Instrumentation
- Communications systems
- Medical systems
- Automotive applications
- PCMCIA cards
- Audio and video signal routing
