Z85C3016PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 15mA |
| Access Time | 16 μs |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.94mm |
| Length | 52.58mm |
| Width | 14.22mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3016PSC Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for this feature.It comes in a Tube case.In this case, this component is installed in accordance with Through Hole.The device is capable of supplying voltages of 4.5V~5.5V volts.The Z85C30can be used to find related parts.It consists of 40terminations.Make sure this device is set to 5V.In total, it contains 40pins.In order to operate, the 40pins are used.The device is mounted by Through Hole.The device must operate at a minimum working temperature of 0°Cin order to be reliable.When 70°Cis the maximum value, the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.This device supports SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOLuPs/uCs/peripheral ICs.It is capable of delivering voltage at 5V degrees Celsius.Using this device, it is also possible to establish [0].When operating at a frequency of [0], it is capable of achieving good performance.In the interface IC, there are 2 serial inputs or outputs.
Z85C3016PSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z85C3016PSC Applications
There are a lot of Zilog Z85C3016PSC Specialized Interface ICs applications.
- Compatible with 65 V DACs and ADCs such as
- SONET/SDH ADM
- AD7840/8, AD7870/1/2/4/5/6/8
- Industrial and process control systems
- Switching Systems
- HDTV
- Digital cross connects (DSX-1)
- Channelized and Unchannelized DS3 applications
- High reliability control systems
- Multi-Line E1 Interface Cards
