Z85C3016PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16.384MHz |
| Supply Current-Max | 15mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3016PSG Overview
This fits nicely with the 40-DIP (0.620, 15.75mm) package.The package contains a Tube case.The component is installed in the way indicated by Through Hole.Devices that are capable of supplying 4.5V~5.5Vvolts may be used.On the basis of the [0], it is possible to find related parts.The number of terminations is 40.It is important to remember that this device should be set to 5V.40pins are on it in total.Operation is performed through the 40pins.For optimum reliability, it operates at a temperature of [0].It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.Electronic components in this system belong to the Other Microprocessor ICs family.ICs used in interfaces are operated at a supply voltage of 5V.In this device, there are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs, uCs, or peripheral ICs.The device can deliver voltage at 5V.Using this device, you can also find [0].For the performance, its output frequency should not exceed 16.384MHz.It is noted that the interface IC is equipped with 2serial I/Os.
Z85C3016PSG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3016PSG Applications
There are a lot of Zilog Z85C3016PSG Specialized Interface ICs applications.
- Access Concentrators
- Mechanical reed relay replacement
- Isolation
- ?Digital access cross connects
- Multi-Line E1 Interface Cards
- Medical systems
- Imaging
- Audio and video routing
- MP3 players
- Cell phones
