Z85C3016VSC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 15mA |
| Access Time | 16 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3016VSC Overview
This fits well into the 44-LCC (J-Lead) package.The package contains a Tube case.Surface Mountis the way in which this component is installed.The device is capable of supplying 4.5V~5.5V volts.Based on the [0], related parts can be found.This termination has 44terminations.Be sure to set the device to 5V.It contains a total of 44 pins.In order to operate, we use the 44pins.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.Keeping 70°Cas the maximum value will ensure consistency.The electronic components is from Other Microprocessor ICs family.The uPs/uCs/Peripheral IC this device incoporates is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.As a result, it is capable of delivering voltage at 5V.This device is also capable of finding [0].With a frequency of [0], it is capable of achieving high levels of efficiency.Currently, it has 2serial I/O ports.
Z85C3016VSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z85C3016VSC Applications
There are a lot of Zilog Z85C3016VSC Specialized Interface ICs applications.
- Channel Banks
- ?Microwave transmission systems
- Audio and video routing
- CSU/DSUs
- Data Acquisition Systems
- Avionics test equipment
- Avionics
- Power routing
- Multiplexers
- Access Concentrators
