Z85C3016VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z85C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16MHz |
| Supply Current-Max | 15mA |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.86mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3016VSG Overview
The 44-LCC (J-Lead)package fits the device well.The item is packaged in a Tube case.In this case, this component is installed in accordance with Surface Mount.The ability to supply 4.5V~5.5V volts is available with certain devices.On the basis of the [0], it is possible to find related parts.In total, there are 44terminations.Be sure to set the device to 5V.44pins are on it in total.Operation is carried out through the 44pins.It is mounted by Surface Mount.It is designed to work at a minimum working temperature of 0°C to ensure reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.The electronic components is from Other Microprocessor ICs family.The interface IC conducts in a supply voltage of 5V.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.It is capable of delivering voltage at 5V degrees Celsius.The device can also be used to find [0].Ideally, its output frequency should not exceed 16MHz.The interface IC has 2serial I/O ports.
Z85C3016VSG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z85C3016VSG Applications
There are a lot of Zilog Z85C3016VSG Specialized Interface ICs applications.
- Video switching
- Communications systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Cellular phones
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- Automatic test equipment
- ?Remote wireless modules
- Audio and video routing
- Relay Replacement
