ZL6105ALAF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 36 |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.54 TO 5.5V, ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 36 |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Interface | I2C, SMBus |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 40A |
| Quiescent Current | 16mA |
| Frequency (Max) | 1.4MHz |
| Voltage - Output | 5.5V |
| Input Voltage (Min) | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 95 % |
| Duty Cycle (Max) | 95 % |
| Clock Sync | Yes |
| Number of Output Phases | 1 |
| Height | 900μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ZL6105ALAF Overview
With a QFN package, the switching controller is suitable for a wide range of applications. There is a Bulk solid enclosure around the pmic. Switching can be done at 1.4MHz with this switching controller. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . The 36 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 12V nominal DC switcher's voltage input. In total, switching converter has 36 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 3V. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 95 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.54 TO 5.5V, ALSO OPERATES AS LDO REGULATOR. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5V. Ideally, dc regulator should be kept at a temperature of -40°C or higher. DC regulator should run at a temperature 85°C higher than 85°C. Overall, the switch converters contains 1 function(s). DC switchings that are dormant use 16mA. Designing voltage regulators switchings with 36 pins is one of the most important aspects of the process. There is a maximum frequency of 1.4MHz that the controller can switch at. With 40A input, it is ideal for switching controllers. When it is working normally, it outputs a value of 5.5V. There are 1 phases in this controller.
ZL6105ALAF Features
Switching Frequency: 1.4MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.54 TO 5.5V, ALSO OPERATES AS LDO REGULATOR
ZL6105ALAF Applications
There are a lot of Intersil (Renesas Electronics America) ZL6105ALAF DC to DC converter applications.
- Communication system
- Motor controller circuits
- Serial communication converter
- Wind power
- Household control circuits
- Industrial controllers
- Solar power plants
- Scientific research
- Lathes
- Automatic testing equipment
