ZXCT1008FTA
| Parameters | |
|---|---|
| Max Input Voltage | 20V |
| Bandwidth | 2MHz |
| Sensing Method | High-Side |
| Input Current | 100nA |
| Switching Frequency | 300kHz |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1008 |
| Function | Current Monitor |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 15μA |
| Voltage - Input | 2.5V~20V |
| Current - Output | 25mA |
| Adjustable Threshold | NO |
| Quiescent Current | 4μA |
| Accuracy | ±1% |
| Min Input Voltage | 2.5V |
ZXCT1008FTA Overview
Buck boost converter is included in the package Tape & Reel (TR).In the same manner as TO-236-3, SC-59, SOT-23-3, voltage regulator is packaged.Current regulator is mounted by Surface Mount.Current regulator is recommended that the operating temperature not exceed -40°C~85°C.There is a support for voltages of 2.5V~20V as input voltages for this voltage regulator.As well as 3 terminations, there are also 3 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.Current regulator belongs to the family ZXCT1008.In computers and other communications constant current regulators, 3 pins are pronged contacts that form part of a signal interface.The current regulator is mounted on the Surface Mount axis.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.In addition to the maximum design flexibility that 25mA provides, its output current is also quite high.This power converter uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Channels are becoming stronger/weaker based on the following statistics: 1.It supports the maximal supply voltage of 20V.The current regulations of this part are included in a part that is named Power Management Circuits.With the minimum supply voltage of 2.5V, it is able to operate.During its operation, 15μA is reached by the operating supply current.5V power supplies are required to operate current regulation.20V features maximum design power converter flexibility because of the maximal input voltage that it can accept.2.5V features maximum design flexibility due to its minimal input voltage.Whatever the external influences, it consumes 4μA amperes of quiescent current.
ZXCT1008FTA Features
Tape & Reel (TR) package
ZXCT1008 family
The maximal supply voltage of 20V
5V power supplies
ZXCT1008FTA Applications
There are a lot of Diodes Incorporated ZXCT1008FTA Current Regulation/Managements applications.
- Industrial applications current measurement
- Over current monitor
- Battery management
- Power management
- Motor controls
- Over current monitor
- Diesel injection controls
- Current sensing
- Transmission controls
- Smart battery packs
