ZXCT1022E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1022 |
| Function | Current Monitor |
| Number of Outputs | 1 |
| Output Voltage | 10.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 35μA |
| Voltage - Input | 2.5V~20V |
| Power Dissipation | 450mW |
| Adjustable Threshold | YES |
| Quiescent Current | 25μA |
| Accuracy | ±3% |
| Max Output Voltage | 10.3V |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 20V |
| Bandwidth | 300 kHz |
| Sensing Method | High-Side |
| Input Current | 100nA |
| Height | 1.1mm |
| Length | 3.1mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1022E5TA Overview
Included in package Tape & Reel (TR) is this file.SC-74A, SOT-753 has packaged voltage regulator in this manner.Mounted by Surface Mount is this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.The input voltage of 2.5V~20V is supported as an input voltage.The 5 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.In the ZXCT1022 family, current regulator is a member.There are 5 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. It is mounted by Surface Mount on this current regulator.In order to make this constant current work, it needs to be powered by 15VV.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Compared to the last few years, the number of channels has grown strong/weak: 1.As a result, it allows 20V to be supplied with its maximum voltage.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.This buck boost converter is designed to operate with a minimal supply voltage of 2.5V as its input voltage.This boost converter is supplied with an operating supply current of 35μA for its operation.The maximum input voltage of 20V allows for maximum design power converter flexibility.The minimal input voltage of 2.5V makes it feature maximum design flexibility.With 1 output, it is configured.It consumes 25μA of quiescent current without being affected by external factors.
ZXCT1022E5TA Features
Tape & Reel (TR) package
ZXCT1022 family
The maximal supply voltage of 20V
1 output
ZXCT1022E5TA Applications
There are a lot of Diodes Incorporated ZXCT1022E5TA Current Regulation/Managements applications.
- Industrial applications current measurement
- Over-current protection
- Suspension controls
- Over current monitor
- Automotive current measurement
- Level translating
- DC motor control
- Programmable current source
- Over-current measurement
- DC-to-dc converters
