Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
73.992255mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
500mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ZXCT1030 |
Function |
Current Monitor |
Number of Outputs |
3 |
Output Voltage |
18V |
Power Supplies |
15V |
Number of Channels |
1 |
Max Supply Voltage |
20V |
Min Supply Voltage |
2.2V |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
270μA |
Voltage - Input |
2.2V~20V |
Power Dissipation |
500mW |
Max Supply Current |
350μA |
Adjustable Threshold |
NO |
Quiescent Current |
270μA |
Accuracy |
±3% |
Max Output Voltage |
18V |
Min Input Voltage |
2.5V |
Max Input Voltage |
20V |
Bandwidth |
6MHz |
Sensing Method |
High-Side |
Input Current |
48μA |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
ZXCT1030N8TA Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.The package is in the form of 8-SOIC (0.154, 3.90mm Width).Surface Mount is used to mount this current regulator on the board.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.As far as input voltage goes, current regulator supports the value of 2.2V~20V.As well as 8 terminations, there are also 8 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.Moreover, current regulator is part of the ZXCT1030 family.When a computer or other communication constant current regulator has 8 pins, these are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.The supply voltage of this electrical constant current is 15V.This power converter utiliPOWER SUPPLY SUPPORT CIRCUITes an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT.In terms of channel number, I would say that it is growing strongly/weakly: 1.As long as 20V is supplied with the maximal voltage, the buck boost converter will work.Part Power Management Circuits consists of these current regulations as well as other current regulations.With the minimum supply voltage of 2.2V, it is able to operate.As soon as 270μA reaches the operating supply current, the boost converter begins to operate.A power supply 15V is required to operate current regulation.Due to its maximal input voltage, 20V provides maximum design power converter flexibility.Because 350μA has a maximum supply current, it offers maximum current regulator's design flexibility.Due to its minimal input voltage, 2.5V provides maximum design flexibility.Output 3 is configured.Whatever the external influences, it consumes 270μA amperes of quiescent current.
ZXCT1030N8TA Features
Tape & Reel (TR) package
ZXCT1030 family
The maximal supply voltage of 20V
15V power supplies
3 output
ZXCT1030N8TA Applications
There are a lot of Diodes Incorporated ZXCT1030N8TA Current Regulation/Managements applications.
- Over-current measurement
- Over current monitor
- Suspension controls
- Level translating
- Vehicle dynamic controls
- DC-to-dc converters
- Over current monitor
- Over-current protection
- Transmission controls
- Battery management