ZXCT1030X8TA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1030 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Voltage | 10mV |
| Power Supplies | 15V |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 2.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 350μA |
| Voltage - Input | 2.2V~20V |
| Adjustable Threshold | NO |
| Accuracy | ±3% |
| Bandwidth | 6MHz |
| Supply Current-Max (Isup) | 0.35mA |
| Sensing Method | High-Side |
| Height Seated (Max) | 1.1mm |
| Length | 3.1mm |
| RoHS Status | RoHS Compliant |
ZXCT1030X8TA Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is the way in which voltage regulator is packaged.Mounted by Surface Mount, this current regulator is a semiconductor.Current regulator is recommended that the operating temperature not exceed -40°C~85°C.As an input voltage, you will be able to input a voltage equal to 2.2V~20V.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the ZXCT1030 family of products.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. It is mounted by Surface Mount on this current regulator.There is no reason why the constant current cannot work as long as it is powered by a 15VV power source.This power converter utiliPOWER SUPPLY SUPPORT CIRCUITes an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT.In terms of channel number, I would say that it is growing strongly/weakly: 1.20V's maximum supply voltage can be supported by this buck boost converter.In order to include these current regulations, there is a part called Power Management Circuits that includes them.With the minimal supply voltage of 2.2V, it is capable of operating.In order for it to operate, it requires an operating supply current of 350μA.It reaches 0.35mA when the maximum supply current (Isup) that can be supplied for current regulation's operation can be obtained.A 15V power supply is used to power the boost converter.
ZXCT1030X8TA Features
Tape & Reel (TR) package
ZXCT1030 family
The maximal supply voltage of 20V
15V power supplies
ZXCT1030X8TA Applications
There are a lot of Diodes Incorporated ZXCT1030X8TA Current Regulation/Managements applications.
- Smart battery packs
- Transmission controls
- Over current monitor
- Industrial applications current measurement
- Programmable current source
- Level translating
- DC motor control
- DC-to-dc converters
- Suspension controls
- Diesel injection controls
