ZXCT1051E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 300mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1051 |
| Function | Current Monitor |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 70μA |
| Voltage - Input | 2.7V~20V |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 50μA |
| Accuracy | ±1% |
| Max Output Voltage | 18V |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 18V |
| Bandwidth | 1MHz |
| Sensing Method | High/Low-Side |
| Input Current | 60nA |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1051E5TA Overview
Buck boost converter is included in the package Tape & Reel (TR).In this case, voltage regulator has been packaged in the same way as SC-74A, SOT-753.In this case, Surface Mount holds the current regulator in place.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage input of 2.7V~20V for the input.In addition to the 5 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to the family ZXCT1051.In computers and other communication constant current regulators, 5 pins are pronged contacts that form part of a signal interface.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.There is a strong/weak growth in the number of channels: 1.The maximum supply voltage of 20V is supported by it.As long as the supply voltage is lower than 2.7V, it will operate correctly.As soon as 70μA reaches the operating supply current, the boost converter begins to operate.As a result of the maximal input voltage of 18V, its design power converter flexibility is maximi18Ved.Due to the minimal input voltage of 2.7V, it offers maximum design flexibility.It is configured with 1 output.It consumes 50μA of quiescent current regardless of external influences.
ZXCT1051E5TA Features
Tape & Reel (TR) package
ZXCT1051 family
The maximal supply voltage of 20V
1 output
ZXCT1051E5TA Applications
There are a lot of Diodes Incorporated ZXCT1051E5TA Current Regulation/Managements applications.
- Battery chargers
- DC-to-dc converters
- Diesel injection controls
- Transmission controls
- Programmable current source
- DC motor control
- Smart battery packs
- Power supply current measurement
- Motor controls
- Over current monitor
