ZXCT1080E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1080 |
| Function | Current Monitor |
| Operating Supply Voltage | 12V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 80μA |
| Voltage - Input | 3V~60V |
| Current - Output | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 80μA |
| Accuracy | ±3% |
| Common Mode Rejection Ratio | 106 dB |
| Bandwidth | 500 kHz |
| Gain | 10 dB |
| Sensing Method | High-Side |
| Input Current | 42μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1080E5TA Overview
Package Tape & Reel (TR) includes buck boost converter.In the way voltage regulator is packaged, voltage regulator is in the form of a SC-74A, SOT-753.Mounted by Surface Mount is this current regulator.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.The input voltage of 3V~60V is supported as an input voltage.The 5 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Current regulator belongs to ZXCT1080 family.5-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.This electronic part is mounted in the way of Surface Mount.There is no reason why the constant current cannot work as long as it is powered by a 5VV power source.Its maximum design flexibility is due to the output current of 1mA.In this power converter, POWER SUPPLY SUPPORT CIRCUIT is an analog IC.In terms of channel number, I would say that it is growing strongly/weakly: 1.There is a maximum voltage to be supplied to 60V by it.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.In order for it to operate, 3V has to be the minimum supply voltage.A type of FPGA that falls under this category is the Automotive, AEC-Q100 series.When 80μA reaches, it receives its operating supply current.Power is provided by 5V power supplies.In order to maintain high efficiency, it is recommended that the supply voltage be maintained at 12V.Whatever the external influences, it consumes 80μA amperes of quiescent current.
ZXCT1080E5TA Features
Tape & Reel (TR) package
ZXCT1080 family
The maximal supply voltage of 60V
Automotive, AEC-Q100 series
5V power supplies
ZXCT1080E5TA Applications
There are a lot of Diodes Incorporated ZXCT1080E5TA Current Regulation/Managements applications.
- Battery chargers
- Power supply current measurement
- Diesel injection controls
- DC motor control
- Transmission controls
- Over-current measurement
- Engine management
- Power management
- Over current monitor
- Battery management
