ZXCT1081E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1081 |
| Function | Current Monitor |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 120μA |
| Voltage - Input | 3V~40V |
| Power Dissipation | 300mW |
| Current - Output | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 80μA |
| Accuracy | ±3% |
| Max Output Voltage | 1.5V |
| Min Input Voltage | 3V |
| Max Input Voltage | 40V |
| Bandwidth | 50 kHz |
| Sensing Method | High-Side |
| Input Current | 60μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1081E5TA Overview
Included in package Tape & Reel (TR) is this file.SC-74A, SOT-753 is the way in which voltage regulator is packaged.Current regulator is mounted by Surface Mount.The operating temperature should not exceed -40°C~125°C.As far as input voltage goes, current regulator supports the value of 3V~40V.The 5 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Among the ZXCT1081 family of products.Several pronged contacts are used in computer interfaces as 5 pins.There is a Surface Mount mounting bracket on the back of this current regulator.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.There is an increase/decrease in the number of channels: 1.As a result, it allows 12V to be supplied with its maximum voltage.In order to include these current regulations, there is a part called Power Management Circuits that includes them.As a result, it operates at the minimal supply voltage of 4.5V.This boost converter is supplied with an operating supply current of 120μA for its operation.A power supply 5V is required to operate current regulation.As a result of the maximal input voltage of 40V, its design power converter flexibility is maximi40Ved.A minimal input voltage allows 3V to feature maximum design flexibility.There is a 1 output configured.No matter what the external influences are, it will consume 80μA of quiescent current regardless of those influences.
ZXCT1081E5TA Features
Tape & Reel (TR) package
ZXCT1081 family
The maximal supply voltage of 12V
5V power supplies
1 output
ZXCT1081E5TA Applications
There are a lot of Diodes Incorporated ZXCT1081E5TA Current Regulation/Managements applications.
- Programmable current source
- Over-current protection
- Power management
- Engine management
- DC motor control
- Motor controls
- Suspension controls
- Power supply current measurement
- Battery management
- Over current monitor
