ZXCT1084E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1084 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2μA |
| Voltage - Input | 2.7V~60V |
| Adjustable Threshold | NO |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 500 kHz |
| Supply Current-Max (Isup) | 0.002mA |
| Sensing Method | High-Side |
| Number of Amplifiers | 1 |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1084E5TA Overview
Included in package Tape & Reel (TR) is this file.In this case, voltage regulator has been packaged in the same way as SC-74A, SOT-753.There is a Surface Mount mounted on this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 2.7V~60V.There is a ZXCT1084 family member who is related to current regulator.Computers or other communication constant current regulators have 5 pins, which are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.In order to make this constant current work, it needs to be powered by 5VV.This power converter uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing strong/weak: 1.There is a maximum voltage to be supplied to 60V by it.As a result, these current regulations are included in a part called Power Management Circuits, which consists of these current regulations.As long as the supply voltage is lower than 2.7V, it will operate correctly.An example of this type of FPGA is the Automotive, AEC-Q100 series.This boost converter is supplied with an operating supply current of 2μA for its operation.It reaches 0.002mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.A power supply 5V is required to operate current regulation.For high efficiency, the supply voltage should be maintained at 5.5V.
ZXCT1084E5TA Features
Tape & Reel (TR) package
ZXCT1084 family
The maximal supply voltage of 60V
Automotive, AEC-Q100 series
5V power supplies
ZXCT1084E5TA Applications
There are a lot of Diodes Incorporated ZXCT1084E5TA Current Regulation/Managements applications.
- Current sensing
- Automotive current measurement
- Power management
- Battery management
- Over current monitor
- DC-to-dc converters
- Diesel injection controls
- Suspension controls
- Over-current measurement
- Level translating
