ZXCT1085E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1085 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2μA |
| Voltage - Input | 2.7V~40V |
| Adjustable Threshold | NO |
| Common Mode Rejection Ratio | 106 dB |
| Supply Current-Max (Isup) | 0.002mA |
| Sensing Method | High-Side |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1085E5TA Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).SC-74A, SOT-753 has packaged voltage regulator in this manner.A mounting hole is provided for Surface Mount to mount this current regulator.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage of 2.7V~40V as an input voltage.A 5 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 5 termination.Current regulator belongs to the family ZXCT1085.Computers or other communication constant current regulators have 5 pins, which are pronged contacts.Surface Mount is responsible for mounting this current regulator.In order to make this constant current work, it needs to be powered by 5VV.POWER SUPPLY SUPPORT CIRCUIT is the analog IC in this power converter.The number of channels is growing strong/weak: 1.A maximum supply voltage of 40V can be supported by it.Power Management Circuits is a part that includes these current regulations, all of which are included in one part.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.It is a type of FPGA belonging to the Automotive, AEC-Q100 series.It reaches 2μA when the operating supply current is supplied.The maximum amount of supply current (Isup) required for it to operate reaches a value of 0.002mA.5V power supplies are required to operate current regulation.It is important to maintain the supply voltage at 5.5V in order to ensure high efficiency.
ZXCT1085E5TA Features
Tape & Reel (TR) package
ZXCT1085 family
The maximal supply voltage of 40V
Automotive, AEC-Q100 series
5V power supplies
ZXCT1085E5TA Applications
There are a lot of Diodes Incorporated ZXCT1085E5TA Current Regulation/Managements applications.
- Smart battery packs
- Power supply current measurement
- Diesel injection controls
- Current sensing
- Battery management
- Suspension controls
- Power management
- Vehicle dynamic controls
- Over current monitor
- DC-to-dc converters
