ZXCT1109SA-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1109 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Voltage | 33.5V |
| Operating Supply Voltage | 9V |
| Power Supplies | 20V |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 19nA |
| Voltage - Input | 2.5V~36V |
| Nominal Supply Current | 3μA |
| Output Current | 2.015mA |
| Adjustable Threshold | NO |
| Common Mode Rejection Ratio | 100 dB |
| Bandwidth | 650 kHz |
| Sensing Method | High-Side |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Number of Amplifiers | 1 |
| Height | 1.1mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXCT1109SA-7 Overview
Included in package Cut Tape (CT) is this file.oltage regulator is packaged in such a way that TO-236-3, SC-59, SOT-23-3 would understand.The current regulator is mounted by Surface Mount.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.There is a support for voltages of 2.5V~36V as input voltages for this voltage regulator.Current regulator belongs to ZXCT1109 family.Computers or other communication constant current regulators have 3 pins, which are pronged contacts.It is mounted on a Surface Mount-axis by this current regulator.In order for the constant current to work, it should be powered by a 20VV power source, which is found in most 20VV power supplies.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.A significant number of channels are growing strongly/weakly: 1.As long as 36V is supplied with the maximum voltage, it is supported.Power Management Circuits is a part that includes these current regulations, all of which are included in one part.A minimum supply voltage of 2.5V is required for its operation.19nA is the operating supply current provided for its operation.The system is powered by 20V power supplies.For optimum efficiency, the supply voltage should be kept at 9V at all times.
ZXCT1109SA-7 Features
Cut Tape (CT) package
ZXCT1109 family
The maximal supply voltage of 36V
20V power supplies
ZXCT1109SA-7 Applications
There are a lot of Diodes Incorporated ZXCT1109SA-7 Current Regulation/Managements applications.
- Over-current protection
- Over-current measurement
- Industrial applications current measurement
- Over current monitor
- Motor controls
- Smart battery packs
- Over current monitor
- Power management
- Transmission controls
- DC-to-dc converters
