Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
20V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ZXCT1110 |
Function |
Current Monitor |
Operating Supply Voltage |
9V |
Power Supplies |
20V |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
19nA |
Voltage - Input |
2.5V~36V |
Nominal Supply Current |
3μA |
Output Current |
2.015mA |
Adjustable Threshold |
NO |
Common Mode Rejection Ratio |
100 dB |
Bandwidth |
650 kHz |
Sensing Method |
High-Side |
Number of Amplifiers |
1 |
Height |
1.1mm |
Length |
3mm |
Width |
1.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ZXCT1110W5-7 Overview
Buck boost converter is part of the package Cut Tape (CT).In the same manner as SC-74A, SOT-753, voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of 2.5V~36V may be used as an input voltage.There are two types of ZXCT1110s in this family.In computers and other communications constant current regulators, 5 pins are pronged contacts that form part of a signal interface.It is mounted by Surface Mount on this current regulator.Providing the constant current is powered by a 20VV power source, the constant current should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.Compared to the last few years, the number of channels has grown strong/weak: 1.The maximum supply voltage of 36V is supported by it.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.With the minimum supply voltage of 2.5V, it is able to operate.The operating supply current supplied for its operation reaches 19nA.A 20V power supply is used to power the boost converter.For high efficiency, the supply voltage should be maintained at 9V.
ZXCT1110W5-7 Features
Cut Tape (CT) package
ZXCT1110 family
The maximal supply voltage of 36V
20V power supplies
ZXCT1110W5-7 Applications
There are a lot of Diodes Incorporated ZXCT1110W5-7 Current Regulation/Managements applications.
- Motor controls
- Power supply current measurement
- Over current monitor
- Over current monitor
- Over-current protection
- DC-to-dc converters
- Over-current measurement
- Industrial applications current measurement
- Vehicle dynamic controls
- Battery management