ZXFV302N16TA
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 45kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXFV302 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 17mA |
| Max Supply Current | 21mA |
| Turn On Delay Time | 35 ns |
| Supply Type | Dual |
| Bandwidth | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 10 ns |
| Max Dual Supply Voltage | 5.25V |
| -3db Bandwidth | 300MHz |
| Min Dual Supply Voltage | 4.75V |
| Dual Supply Voltage | 5V |
| Switch-off Time-Max | 22ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
ZXFV302N16TA Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Cut Tape (CT). A switch device like this is mounted in Surface Mount. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with ZXFV302. Analog switches have 45kOhm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. Dual supply type digital switch with a low cost. It would be sufficient to run this analogue multiplexer with 17mA current. If you put voltage higher than 21mA on the digital multiplexer, damage may occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.25V. In the case of dual power supplies, you should connect at least 4.75V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating voltages range from 5V. It is possible to transfer data over a 300MHz-bandwidth. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
ZXFV302N16TA Features
4 Channels
17mA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
ZXFV302N16TA Applications
There are a lot of Diodes Incorporated ZXFV302N16TA Analog Switches & Multiplexers ICs applications.
- MP3 players
- Ultrasound
- Avionics and Military Systems
- Relay Replacement
- Switching Systems
- Cable PC
- Public switching systems
- Cable Modem
- ISDN NT1/TA
- Signal routing between systems
