ZXGD3002E6TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Voltage - Supply | 20V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXGD3002 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 19.6V |
| Max Output Current | 9A |
| Voltage | 20V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.1W |
| Output Current | 2A |
| Propagation Delay | 2 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Max Output Voltage | 19.6V |
| Rise Time | 11ns |
| Fall Time (Typ) | 11 ns |
| Min Output Voltage | 400mV |
| Rise / Fall Time (Typ) | 8.3ns 10.8ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXGD3002E6TA Overview
The SOT-23-6 package offers greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).There is a mounting bracket in the way of Surface Mount.WGate driversh a 20V Max supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -55°C~150°C TJ.Non-Inverting is used as its input type.6 terminations constitute its foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number ZXGD3002.The mount method is Surface Mount.In the device, there are 6 pins.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be limited to 9A.Several electronic components are included in its subcategory of MOSFET Drivers.The board has 6 component pins.Based on its basis, it integrates 1 outputs.The output current can be set to 2A.Based on its maximum power dissipation of 1.1W, it is clear that it is capable of transferring and conducting power loss without overheating.A voltage of 19.6V is output by this device.The supply voltage is 50nA.In general, it is recommended to keep the maximum output voltage at 19.6V.
ZXGD3002E6TA Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
6 pins
Maximum power dissipation of 1.1W
ZXGD3002E6TA Applications
There are a lot of Diodes Incorporated ZXGD3002E6TA gate drivers applications.
- Video amplifiers
- High power buffers
- Head-up and Head mounted displays
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 3-Phase Motor Inverter Driver
- Industrial motor drives - compact, standard, premium, servo drives
- Multicolor LED/laser displays
- UPS systems
- Isolated switch mode power supplies (SMPS)
