ZXGD3003E6TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.1W |
| Voltage - Supply | 40V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | ZXGD3003 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 39.6V |
| Max Output Current | 5A |
| Operating Supply Current | 20nA |
| Power Dissipation | 1.1W |
| Output Current | 1.4A |
| Propagation Delay | 2 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Max Output Voltage | 39.6V |
| Rise Time | 8.9ns |
| Fall Time (Typ) | 8.9 ns |
| Min Output Voltage | 400mV |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 8.9ns 8.9ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | NO |
| Height | 1.4mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXGD3003E6TA Overview
The SOT-23-6 package offers greater flexibility.The packaging method is indicated by Tape & Reel (TR).Surface Mount is mounted in the way.WGate driversh a 40V Max supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.The input type is Non-Inverting.The configuration starts with 6 terminations.The base part number ZXGD3003 refers to a number of related parts.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 6 pins when designing.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 5A for this device.Components with 6 pins are available.For its basis, there are 1 outputs integrated.The output current of this device can be set to 1.4A.Considering its maximum power dissipation, 1.1W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers outputs 39.6V as voltage.A voltage of 20nA is used as the supply voltage.STANDARD is its input.Mosfet driver ic is recommended to keep the maximum output voltage at 39.6V.
ZXGD3003E6TA Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
6 pins
Maximum power dissipation of 1.1W
ZXGD3003E6TA Applications
There are a lot of Diodes Incorporated ZXGD3003E6TA gate drivers applications.
- Motor Control
- Motor controllers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- LCD/LCoS/DLP portable and embedded pico projectors
- Pulse transformer drivers
- Telecom switch mode power supplies
- Commercial and agricultural vehicles (CAV)
- DC/DC converters
- 3-Phase Motor Inverter Driver
- High-voltage isolated DC-DC converters
