ZXGD3004E6TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Voltage - Supply | 40V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXGD3004 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Max Output Current | 8A |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.1W |
| Output Current | 1.9A |
| Propagation Delay | 1 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Max Output Voltage | 39.6V |
| Rise Time | 77.9ns |
| Fall Time (Typ) | 12.4 ns |
| Min Output Voltage | 400mV |
| Rise / Fall Time (Typ) | 13.4ns 12.4ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 8A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 8A 8A |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | NO |
| Height | 1.4mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXGD3004E6TA Overview
A higher degree of flexibility is achieved by adopting its SOT-23-6 package.The packaging method is indicated by Tape & Reel (TR).Surface Mount is the way in which it is mounted.By using 40V Max supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.Input type of Non-Inverting is used.It's configured with 6 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number ZXGD3004.You mount it with Surface Mount.When the device is designed, it has 6 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 8A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 6 component pins is available.The basis of this system consists of 1 outputs.Mosfet driver supports an output current of 1.9A.Its maximum power dissipation of 1.1W shows its power loss capacity without overheating.With a 50nA supply voltage, it operates.In order to maintain the maximum output voltage, it must be set at 39.6V.
ZXGD3004E6TA Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
6 pins
Maximum power dissipation of 1.1W
ZXGD3004E6TA Applications
There are a lot of Diodes Incorporated ZXGD3004E6TA gate drivers applications.
- Commercial air-conditioning (CAC)
- High current laser/LED systems
- Industrial Power Supplies
- Isolated Supplies for controller area network (CAN),
- Pulse transformer drivers
- Line drivers
- PCMCIA applications
- Isolated Gate Driver Supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Smart Phones
