ZXGD3103N8TC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 490mW |
| Voltage - Supply | 5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXGD3103 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 9.5V |
| Max Output Current | 6A |
| Operating Supply Current | 5.16mA |
| Power Dissipation | 490mW |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Rise Time | 450ns |
| Fall Time (Typ) | 21 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 450ns 21ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 6A |
| High Side Driver | YES |
| Height | 1.5mm |
| Length | 5.3mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXGD3103N8TC Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Its recommended mounting way is Surface Mount.A supply voltage of 5V~15V demonstrates its superiority.Gate type N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.The input type for this program is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.You will find various related parts under the base part number ZXGD3103.Mounting the device requires Surface Mount.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 10V volts.Mosfet driver utilizes the interface IC HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 6A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.For its basis, there are 1 outputs integrated.Using 490mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers produces a voltage of 9.5V.Powered by 5.16mA volts, it operates on a constant current.
ZXGD3103N8TC Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 490mW
ZXGD3103N8TC Applications
There are a lot of Diodes Incorporated ZXGD3103N8TC gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High power buffers
- Solar power supplies
- PCMCIA applications
- AC-DC Inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Control
- Motor Controls
- Smart Phones
