ZXLD1321DCATC
| Parameters | |
|---|---|
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 4.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1321 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Fixed |
| Max Output Current | 1mA |
| Max Supply Voltage | 12V |
| Output Current | 1A |
| Max Output Voltage | 18V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 12V |
| Output Current per Channel | 1A |
| Current - Output / Channel | 1A Switch |
| Max Output Power | 8W |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 600kHz |
| Voltage - Supply (Min) | 2V |
ZXLD1321DCATC Overview
As a result of its 14-TDFN Exposed Pad package, it helps to save board space on the board. LED drivers with this design have 1 outputs.Surface Mount is used to mount the led driver.It is highly performing and reliable when it emerges as a DC DC Regulator.The led light driver can work at -40°C~125°C TA.There are many benefits for Backlight, Lighting.It operates with terminations of 14.It has a base of 14 pins.If the voltage supply is below 2V, undetermined failures may occur.It consists of 1 segments.There is a mounting of it by Surface Mount.You can find this LED driver under the base part number ZXLD1321.It is acceptable for the supply voltage to be 12V.There are 14 pins on it.According to its characteristics, it is also categorized into Display Drivers.A minimal input voltage of 1.2V is required for it to operate.12V is the maximum value of the supply current.It is possible to supply the load with 1A current.Having the switching frequency at 600kHz enables this electronic component to perform at its best.Even when operating at a maximal output current of 1mA, it is capable of delivering all the benefits of a LED driver.It is not recommended to exceed 18V in the output voltage.A Fixed output type is equipped with it.
ZXLD1321DCATC Features
Available in the 14-TDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3V
Switching frequency of 600kHz
ZXLD1321DCATC Applications
There are a lot of Diodes Incorporated ZXLD1321DCATC LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Museum lighting
- Scanners and Handy Terminals
- Architectural lighting
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
