ZXLD1322DCCTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO AVAILABLE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1322 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 700mA |
| Input Voltage-Nom | 4V |
| Max Supply Voltage | 15V |
| Output Current | 700mA |
| Max Output Voltage | 500mV |
| Voltage - Output | 18V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 15V |
| Output Current per Channel | 700mA |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 0V |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 600kHz |
| Height | 900μm |
| Length | 3.05mm |
| Width | 4.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1322DCCTC Overview
The 14-VFDFN Exposed Pad package conserves board space. For the design of these LED drivers, 1 outputs are used.It is possible to mount the led driver using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.The led light driver operates normally at -40°C~125°C TA. Taking advantage of Backlight, Lighting has considerable benefits.For its operation, 14 terminations are designed.The LED light driver has a base configuration of 14 pins.Surface Mount is mounted on it.LED drivers can be found under the base part number ZXLD1322.It is acceptable to operate with a supply voltage of 15V.It produces a voltage of 18V volts.It consists of 14 pins.The minimal input voltage is 2.5V.In terms of supply current, there is a maximum value of 15V.700mA is the maximum current the load can handle.When the switching frequency is maintained at 600kHz, this electronic component is able to fully play its functions.When operating with a maximum output current of 700mA, it can deliver all the benefits of a LED driver.It is recommended that the output voltage be no higher than 500mV.Operation of the device requires 4V volts to be applied to the circuit.It maintains a 0V minimum voltage output.In addition, this LED driver has a PFM CONTROL TECHNIQUE IS ALSO AVAILABLE characteristic.The output type is Adjustable.
ZXLD1322DCCTC Features
Available in the 14-VFDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Switching frequency of 600kHz
PFM CONTROL TECHNIQUE IS ALSO AVAILABLE
ZXLD1322DCCTC Applications
There are a lot of Diodes Incorporated ZXLD1322DCCTC LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for portable equipment
- Replacement lamps
- Down lighting
- Museum lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Constant Voltage Power Source for portable equipment
- Street lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
