ZXLD1356DACTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 21.092045mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1356 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Power Supplies | 24V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6V |
| Power Dissipation | 1.8W |
| Output Current | 550mA |
| Max Supply Current | 550mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 550mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 500kHz |
| Height | 850μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1356DACTC Overview
6-VDFN Exposed Pad package saves space on the board. LED drivers use 1 outputs for their design.Mounting is done according to the Surface Mount method.This emerges as a DC DC Regulator with high efficiency and reliability.It is capable of working normally at -40°C~125°C TA.Automotive, Lighting, Signage has significant advantages.In this case, it uses 6 terminations.The LED light driver is configured with a base of 0 pins.There is a mounting of it by Surface Mount.The LED driver is based on part number ZXLD1356.There is no problem with the voltage of 60V.In addition, it has 6 pins.In addition, its characteristics are classified into Display Drivers.It operates at a voltage of 6V as its minimal input voltage.With a minimal supply voltage of 6V, it reaches the highest efficiency levels.The maximum supply current is reached when 60V is reached.When the maximum supply current is less than 550mA, the device is able to provide a high level of efficiency.The load is capable of receiving 550mA current.This electronic component can fully perform when the switching frequency is 500kHz.Several applications make use of this LED driver from the Automotive, AEC-Q100 series.
ZXLD1356DACTC Features
Available in the 6-VDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 24V
Switching frequency of 500kHz
ZXLD1356DACTC Applications
There are a lot of Diodes Incorporated ZXLD1356DACTC LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- OLED power supply for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Amusement Machines
- Replacement lamps
- Museum lighting
- White LED Backlight for portable equipment
- Down lighting
- A- lamps
